Nissan Armada 2025-2026 Service and Repair Manual: Inspection and Adjustment
INSPECTION AFTER INSTALLATION
Start the engine, and check the joints for coolant leakage. Refer to ENGINE COOLANT : Inspection.
Removal and Installation
WARNING:
REMOVAL
WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure engine coolant escaping from the radiator. Wrap a thick cloth around the ca ...
Other materials:
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to Intelligent Key unit following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
NOTE:
Log in the network according to CONSULT guidance.
>>
WORK END ...
Work Flow
DETAILED FLOW
INTERVIEW FROM THE CUSTOMER
CAUTION:
>>
GO TO 2.
CHECK SYMPTOM
Reproduce the symptom that is indicated by the customer, based on the information from the customer obtained by the interview. Also check that the symptom is not caused by fail-safe mode. Refer to Fail-safe.
CAUTIO ...
ELECTRIC INTAKE VALVE TIMING CONTROL MODULE : Removal & Installation
REMOVAL
Remove air cleaner body. Refer to Removal and Installation.
Remove harness clip to bracket.
Disconnect electric intake valve timing control module harness connector. HARNESS CONNECTOR (LEVER LOCKING TYPE) in Refer to Harness Connector.
Remove electric intake valve timing control module mount ...
0.0063