Diagnostic Work Sheet
Work ProcedureRemoval and Installation
WARNING:
REMOVAL
Drain gear oil. Refer to Draining.
Remove rear propeller shaft from final drive. Refer to Removal and Installation.
Remove drive shafts. Refer to Removal and Installation.
Remove rear supension member stay. Refer to Removal and Installation.
Remove breather hose from rear final dri ...
MULTI-WAY CONTROL VALVE : Removal & Installation
WARNING:
REMOVAL
Remove engine cover. Refer to Removal and Installation.
Remove front under cover using a power tool. Refer to Removal and Installation.
Drain engine coolant. Refer to ENGINE COOLANT : Draining.
CAUTION:
Perform this step when the engine is cold.
Remove air inlet tube 2. Refer to ...
Removal & Installation
REMOVAL
Remove transmission assembly, refer to the following:
2WD models: Refer to Removal and Installation.
4WD models: Refer to Removal and Installation.
Remove drive plate. Refer to Removal and Installation.
Remove rear oil seal with a suitable tool.
CAUTION:
Be careful not to damage cranks ...