Exploded ViewInspection
SIDE RADAR IRRADIATION AREA
For side radar irradiation area, refer to the figure below.
Rear bumper fascia Side radar irradiation area Reference point (R end) C 115 mm
(4.53 in) (vertical line) D 70 mm
(2.76 in) (vertical line) E 215 mm
(8.46 in) (horizontal line) F 105 mm
(4.13 in) (vertic ...
Removal and Installation
REMOVAL
Disengage fixing pawls using a remover tool (A) according to numerical order 1 → 2 indicated by arrows as shown in figure, and then remove sliding switch knob.
: Pawl
Disengage fixing pawls using a remover tool (A), and then remove reclining switch knob.
: Pawl
Remove outside seat cu ...
Adjustment
TOTAL PRELOAD TORQUE
Remove side shaft. Refer to Disassembly and Assembly.
Rotate drive pinion back and forth 2 to 3 times to check for unusual noise and rotation malfunction.
Rotate drive pinion at least 20 times to check for smooth operation of the bearing.
Measure total preload with the preload g ...