
The Nissan Armada Intelligent Key system functions only when the key is located within the defined operating range of the request switches 1 and 2 (if equipped).
For optimal performance, the Nissan Armada Intelligent Key must be within approximately 80 cm (31.50 in) of each request switch.
If the Nissan Armada Intelligent Key battery is weak or if strong radio interference is present in the surrounding environment, the effective operating range may decrease, and the system may not respond correctly.
Additionally, when the Nissan Armada Intelligent Key is positioned too close to the door glass or handle, the system may have difficulty detecting it, which can prevent proper operation of the request switch.
It is also important to note that when the Nissan Armada Intelligent Key is within the operating range, other individuals can operate the request switch to lock or unlock the doors—even if they are not carrying the key.
Door locks/unlocks precaution

- When using the Nissan Armada Intelligent Key, avoid pressing the door handle request switch while holding the key too close to the handle. This may cause the system to misinterpret the key location and fail to detect it correctly.
- After locking the Nissan Armada using the request switch, always confirm that all doors are securely locked by attempting to open them.
- To prevent accidentally leaving the Nissan Armada Intelligent Key inside the vehicle, ensure the key is with you before locking the doors.
- Do not pull the door handle before pressing the request switch, as this may interfere with proper operation of the Nissan Armada locking system.
The Nissan Armada Intelligent Key system is designed for convenience and security, but proper usage and awareness of operating range conditions are essential to ensure reliable performance in everyday situations.
Other materials
Differential Lock Position Switch
Exploded View
Rear final drive assembly
Differential lock position switch
O-ring
: N·m (kg-m, in-lb)
: Apply gear oil.
Removal and Installation
REMOVALIgnition switch OFF.
Disconnect negative battery terminal.
Disconnect the differential lo ...
Front Automatic Air Conditioning System
Work Procedure
DESCRIPTIONThe purpose of the operation inspection is to check that the individual system operates normally. Check condition
: Engine running at normal operating temperature.
OPERATION INSPECTION (DISPLAY UNIT)CHECK MEMORY FUNCTION
Touch AUTO switch to activate air conditioning ...
Rear Propeller Shaft: 3f C-C-C
Inspection
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
LOOSENESS OF CONNECT ...