Do not reduce strength when repairing panels. Avoid excessive hammering which may lead to extending the panel.
Also avoid prolonged heating.
Do not increase the strength of impact absorbing portions unnecessarily. Do not repair these parts.
Choose a method for properly aligning the body.
For example, if changing the front side member of a full frame vehicle, it is recommended that the front suspension mounting member be left alone.
Examine carefully how past collision damage was repaired. This is necessary to properly decide the range to be repaired.
Check material (UHSS, Aluminum, etc.) to determine appropriate repair method.
External Appearance
Parts to be ReplacedDoor Hemming
(a) Grind the edge of the door panel using 3M Cubitron II Abrasive Fibre Disc #33415 (grade 60+) or equivalent.
(b) Insert the tip of a sharp-edged tool, such as a chisel, into the clearance at door outer panel. Use a hammer to tap the tool inserted into the clearance from the side to separate the ...
Exploded View
FRONT
Front heater & cooling unit assembly O-ring High-pressure pipe Valve cap (high-pressure side) Tube clip 1 Washer seal Condenser & liquid tank assembly High-pressure flexible hose Low-pressure flexible hose Valve cap (low-pressure side) Low-pressure pipe Tube clip 2 Front ...
Driver Assistance/Navigation/Traffic Sign/Audio/TEL/SMS/Message for Driver Assistance
linking
In the Nissan Armada, the Head-Up Display (HUD) integrates multiple systems to
present critical driving information directly within the driver’s field of view,
enhancing safety and convenience.
The Driver Assistance interface in the Nissan Armada HUD provides real-time alerts
and warnings f ...