Nissan Armada 2025-2026 Service and Repair Manual: Parts to be Replaced
High-strength steel parts: The strength of these parts will be reduced if repaired by heating.
Parts relating to body alignment and wheel alignment: Replacement of such parts would not provide proper alignment.
When repair costs exceed replacement cost.
Availability of service parts.
When asked by customer.
Repair of door side impact beam and bumper reinforcement is prohibited: Beams and reinforcements must be their original shape to perform as designed. Always replace door side impact beams and bumper reinforcements if damaged.
When performing repair work, it is necessary to consider quality, efficiency and cost, as well as safety and health. It is also important to gain the customer's confidence.
Key Points in Choosing Repair Methods
Do not reduce strength when repairing panels. Avoid excessive hammering which may lead to extending the panel.
Also avoid prolonged heating.
Do not increase the strength of impact absorbing portions u ...
Checking Damage
When completing body and frame repairs, the front body and underbody dimensions must be correct, because these dimensions directly affect wheel alignment and steering angles.
The degree of damage shou ...
Other materials:
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Handling of Welding Equipment
(1) STORAGE OF GAS CYLINDERS
In a well ventilated area, post a “No Fire” sign.
Avoid the direct rays of the sun. Maintain temperature below 40°C (104°F).
Inflammable gas cylinders and oxygen cylinders must not be stored in the same place.
Acetylene cylinders must be stored upright. Check that ...
0.01