Removal and Installation
Removal and InstallationWork Procedure
When driver monitor camera control unit is replaced, be sure to perform the specified incidental work in order to operate system normally.
DRIVER MONOTOR CAMERA CONTROL UNIT CONFIGURATION
>>
GO TO 2.
CHECK DATA MONITOR
Check that "Face" is "within range" in "Data monitor" of "Driver Monitor ...
Diagnosis Procedure
CHECK POWER SUPPLY AND GROUND CIRCUIT (DOOR LOCK)
Check door lock and unlock power supply and ground circuit.
Refer to Diagnosis Procedure (front door lock) and Diagnosis Procedure (rear door lock).
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioni ...
Removal & Installation
WARNING:
REMOVAL
Remove engine cover. Refer to Removal and Installation.
Disconnect battery cables from negative terminal. Refer to Removal and Installation.
Remove engine under cover front and front under cover using a power tool (commercial service tool). Refer to Removal and Installation and Remo ...