Fill with lubricant for the amount that is calculated according to the following conditions.
Example: Lubricant amount to be added when replacing evaporator (front) and condenser & liquid tank [m
(US fl oz, Imp fl oz)] = 45 (1.5, 1.6) + 45 (1.5, 1.6) + α
| Conditions | Lubricant amount to be added to A/C system m (US fl oz, Imp fl oz) | |
|---|---|---|
| Replace evaporator | Front | 45 (1.5, 1.6) |
| Rear | 25 (0.8, 0.9) | |
| Replace condenser & liquid tank | 45 (1.5, 1.6) | |
| Refrigerant leakage is detected | Large amount leakage | 30 (1.0, 1.1) |
| Small amount leakage | — | |
| Lubricant amount that is recycled together with refrigerant during recycle operation | α | |
Perform Lubricant Return Operation
Lubricant Adjusting Procedure for A/C compressor ReplacementRemoval and Installation
REMOVAL
CAUTION:
Never damage the front door panel and any parts.
Remove front door sash inner cover. Refer to Removal & Installation.
Disconnect door mirror assembly harness connectors and .
NOTE:
Harness connector : Side camera harness connector (with side camera)
Remove harness clip.
...
Precaution for Work
When removing or disassembling each component, be careful not to damage or deform it. If a component may be subject to interference, be sure to protect it with a shop cloth.
When removing parts, use remover tool that is made of plastic.
Protect the removed parts with a shop cloth and keep them.
Repl ...
Removal and Installation
REMOVAL
Remove driver air bag module. Refer to Removal & Installation.
Remove steering wheel. Refer to Removal and Installation.
Remove steering column cover upper and lower. Refer to Removal and Installation.
Disconnect spiral cable body side harness connectors .
Left side
: Vehicle front
...