Nissan Armada 2025-2026 Service and Repair Manual: Perform Lubricant Return Operation
CAUTION:
If a large amount of refrigerant or lubricant leakage is detected, never perform lubricant return operation.
Start the engine and set to the following conditions.
Engine speed: Idling to 1,200 rpm
A/C switch: ON
Fan (blower) speed: Maximum speed set
Intake door position: Recirculation
Temperature setting: Full cold
Perform lubricant return operation for approximately 10 minutes.
Stop the engine.
Lubricant return operation is complete.
Inspection
If a A/C compressor is malfunctioning (internal noise, insufficient cooling), check the compressor oil.
COMPRESSOR OIL JUDGMENT
Remove the A/C compressor. Refer to Removal and Installation.
Sample a c ...
Lubricant Adjusting Procedure for Components Replacement Except A/C compressor
Fill with lubricant for the amount that is calculated according to the following conditions.
Example: Lubricant amount to be added when replacing evaporator (front) and condenser & liquid tank [m ...
Other materials:
Exploded View
Without Moonroof Models
Map lamp bracket Headlining assembly Map lamp assembly : Pawl : Metal clip : Vehicle front
With Moonroof Models
Map lamp bracket Headlining assembly Map lamp assembly Dual-lock fastener : Pawl : Metal clip : Vehicle front ...
EVAP CANISTER : Exploded View
Vent hose 1 Canister filter Bracket 3 EVAP canister Vent hose 2 Bracket 1 Vent hose 3 EVAP canister vent control valve Clip EVAP control system pressure sensor Bracket 2 Vent hose 4 Clamp To fuel tank. Refer to FUEL TANK : Exploded View. To engine. Refer to Hydraulic Layout. : Vehic ...
Precautions for Removing Battery Terminal
With the adoption of Auto ACC function, ACC power is automatically supplied by operating the Intelligent Key or remote keyless entry or by opening/closing the driver side door. In addition, ACC power is supplied even after the ignition switch is turned to the OFF position, i.e. ACC power is supplied ...
0.0083