Symptom TableRemoval and Installation
REMOVAL
CAUTION:
Never excessively pull rear door glass run.
Remove rear door sash cover. Refer to Removal and Installation.
Remove rear door sash inner cover and inside seal. Refer to Removal and Installation.
Reconnect power window main switch connector with rear door finisher.
NOTE:
The rear doo ...
Work Procedure
CHOOSE METHOD
There are two ways of initialization method.
Which method do you choose?
With CONSULT>>
GO TO 2.
Without CONSULT>>
GO TO 3.
WITH CONSULT
With CONSULT
Ignition switch ON.Perform "Third seat LH position initialization" in "Work support" mode of "THIRD SEAT RH" using CONSUL ...
Removal and Installation
WARNING:
REMOVAL
NOTE:
CAUTION:
Perform this step when the engine is cold.
Remove front bumper. Refer to Exploded View.
Remove front under cover. Refer to Removal and Installation.
Drain A/T fluid. Refer to Draining.
Remove A/T fluid cooler hose A and B from A/T fluid cooler. Refer to Removal and In ...