NVH Troubleshooting Chart
Use chart below to find the cause of the symptom. If necessary, repair or replace these parts.
| Possible cause and suspected parts | SYMPTOM | Reference | |||||
|---|---|---|---|---|---|---|---|
| Noise | Shake | Vibration | Shimmy | Judder | Poor quality ride or handling | ||
| Improper installation, looseness | × | × | × | × | × | × |
|
| Shock absorber deformation, damage or deflection | × | × | × | × | × | × | Inspection |
| Bushing or mounting deterioration | × | × | × | × | × | × | — |
| Parts interference | × | × | × | × | - | × |
|
| Spring fatigue | × | - | × | - | - | × | Inspection |
| Suspension looseness | × | × | - | - | - | - |
|
| Incorrect wheel alignment | - | - | - | × | - | × | Inspection |
| Stabilizer bar fatigue | - | - | - | - | - | × | Inspection |
| Propeller Shaft | × | × | × | - | - | - | FRONT PROPELLER SHAFT: 2F C-C: NVH Troubleshooting Chart |
| Differential | × | - | - | - | - | - | NVH Troubleshooting Chart |
| Front Axle and Front Suspension | × | × | × | × | × | × |
|
| Tire | × | × | × | × | × | × | NVH Troubleshooting Chart |
| Road Wheel | × | × | - | × | × | × | NVH Troubleshooting Chart |
| Drive Shaft | × | × | × | - | - | - |
|
| Brake | × | × | - | × | × | - | NVH Troubleshooting Chart |
| Steering | × | × | × | × | × | - | NVH Troubleshooting Chart |
×: Applicable
Other materials
Massage Switch
Removal and Installation
REMOVALRemove outside seat cushion finisher outer. Refer to Disassembly and Assembly.
Disengage massage switch harness fixing clip.
: Clip
Remove fixing screws and then remove massage switch.
INSTALLATIONInstall in the reverse order of removal. ...
Perform the Steering Column Position Learning
Description
Perform the steering column position learning when the following conditions are performed. For details, refer to Work Procedure.
Replacing steering column control module.
Steering column does not operate normally.
Work Procedure
CHOOSE METHOD
There are two ways of learning method.
Which ...
Vehicle Security Alarm Does Not Activate
Description
Alarm does not operate when alarm operating condition is satisfied.
Diagnosis Procedure
CHECK DOOR SWITCH
Check door switch. Refer to ComponentFunctionCheck.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Replace the malfunctioning door switch
CHECK HOOD SWITCH
Check ...