Exploded View
Glove box lamp is integrated structure with glove box assembly. For exploded view of instrument panel assembly, refer to Exploded View.
Replacement
CAUTION:
- Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
- Replacement of a single part is not possible due to the integrated structure with glove box assembly. When replacement, replace glove box assembly as a single part. Refer to Removal and Installation.
Other materials
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs).
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK ...
Led Headlamp Operation Inspection
Work Procedure
CHECK START
In the cool LED status (wait for more than 10 minutes after turning headlamp OFF), turn ON and turn OFF headlamp for the several times. Check that headlamp operates normally each time.
In the cool LED status, turn headlamp ON, wait until headlamp enters to the stable s ...
Washer Pump
Exploded View
Washer tank
Packing
Washer pump
Removal and Installation
WARNING:
REMOVALCAUTION:
When washer pump is removed, washer fluid may come out so prepare a container to receive washer fluid and never allow washer fluid to be sprinkled.Remove fender protector RH. Refer to Removal ...