Description
-
When the back door position is in the range of
[between "just before fully closed" 
and the position approximately less than 150 mm (5.91 in) from "just before fully closed" 
], the back door does not operate even if any of switches are operated. -
To operate the back door by switches, manually close the back door to "Fully closed"
position or manually open the back door approximately more than 150 mm (5.91 in) from the position of "Just before fully closed". And then operate any of switches.
Other materials
Rear Axle Tools and Preparation
Special Service Tools
Tool number
(TechMate No.)
Tool name Description
KV40104001
(NI-53385)
Hub lock nut wrench
a: 85 mm (3.35 in)
b: 65 mm (2.56 in)
Removing and Installing wheel hub lock nut.
KV40107300
(NI-51751)
Boot band crimping tool
Installing boot band
KV38108000
( - )
...
Seat Tools and Preparation
Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
Tool number
(TechMate No.)
Tool name Description
(NI-39570)
Chassis ear
Locates the noise
(NI-50397)
Squeak and Rattle Kit
Repairs the cause of noise
Commerci ...
Vr35ddtt
Alternator
Engine
VR35DDTT
Type
A003TV8091
MITSUBISHI make
Nominal rating
(V - A)
14 - 230
Ground polarity
Negative
Minimum revolution under no-load
(When 13.5 V is applied)
(rpm)
Less than 1,500
Hot output current
(When 13.5 V is applied)
(A/rpm)
More t ...