Exploded View
 |
Back door panel |  |
Intelligent rear view mirror camera |  |
Intelligent rear view mirror camera harness connector |
| : vehicle front | |||||
 |
: N·m (kg-m, in-lb) | ||||
Removal and Installation
REMOVAL
Remove back door inner finisher. Refer to Removal and Installation.
Disconnect intelligent rear view mirror camera harness connector 
.
Disengage intelligent rear view mirror camera mounting bolts , and then remove intelligent rear view mirror camera.
INSTALLATION
Install in the reverse order of removal.
Other materials
Rear Propeller Shaft
Exploded View
REMOVAL
Propeller shaft assembly
: vehicle front
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
DISASSEMBLY
Snap ring
Journal bearing
Journal
Sleeve yoke
Propeller shaft tube
Flange yoke
: vehicle front
: Always ...
Normal Operating Condition
Description
Symptom Result
Brake pedal slightly vibrates and operation sound (motor sound and sound from suspension) occurs when VDC function, TCS function, ABS function, EBD function, brake limited slip differential (BLSD) function, brake assist function, hill start assist function, or advanced ...
Charging System Preliminary Inspection
Inspection Procedure
CHECK 12V BATTERY TERMINALS CONNECTION
Check if 12V battery terminals are clean and tight.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair 12V battery terminals connection.
CHECK “B” TERMINAL CONNECTION
Check if “B” terminal (alternator ground h ...