PrecautionsRemoval and Installation
REMOVAL
Remove rear center tray assembly. Refer to Removal and Installation.
Press the USB power socket fixing pawl from the back of the rear center console box to remove the USB power socket.
: Pawl
INSTALLATION
Note the following, and install in the reverse order of removal.
Align the cut out ...
Diagnosis Procedure
CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure.
>>
GO TO 2.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check lntelligent Key unit power supply and ground circuit.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YE ...
When SRS is activated in a collision
CAUTION:
Due to varying models and option levels, not all parts listed in the chart below apply to all vehicles.
WORK PROCEDURE
Before performing any of the following steps, ensure that all vehicle body and structural repairs have been completed.
Replace the diagnosis sensor unit.
Remove the front a ...