Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"Roof Rail
Work after roof is removed.
: Vehicle front : Drill φ8 mm (0.31 in) hole for the plug welding hole (ultra high strength steel). : Drill φ11 mm (0.43 in) hole for the plug welding hole (ultra high strength steel). : Weld the parts onto the back of the component part. : Welding method, the number o ...
Diagnosis Procedure
CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure.
>>
GO TO 2.
CHECK INTELLIGENT KEY BATTERY
Check Intelligent Key battery.
Refer to Component Inspection.
Is the inspection result normal?
YES>>
GO TO 3.
NO>>
Repa ...
ECM : Removal & Installation
CAUTION:
Perform ADDITIONAL SERVICE WHEN REPLACING ECM. Refer to Work Procedure.
REMOVAL
With ProPILOT Assist 2.1
Disconnect the ECM harness connectors.
Remove ECM mounting nuts ( ) and remove ECM from the bracket.
Remove bracket mounting nuts ( ) and remove the bracket .
Without ProPILOT Ass ...