Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"Types of Filler and Putty
Type (Standard thickness limits) Characteristics Body Filler Putty
(For repairing of large dents or scratches)
[10 mm (0.39 in)] Surform type This type of filler requires surforming (rough grinding). It will clog sandpaper if it is sanded only.
Can be thickly applied to panel.
After drying, grind ...
Removal and Installation
REMOVAL
Rear Door Parting Seal Front
Fully open rear door.
Remove rear door parting seal front clip.Apply protective tape (A) to rear door panel around rear door parting seal front clip for preventing damage.
Disengage fixing pawls using a remover tool (A), and then remove rear door parting seal f ...
Unit Removal & Installation
WARNING:
WARNING:
Situate the vehicle on a flat and solid surface.
Place chocks at the front and back of rear wheels.
For engines not equipped with engine slingers, attach proper slingers and bolts described in PARTS CATALOG.
CAUTION:
Always be careful to work safely, and avoid forceful or uninstru ...