Nissan Armada 2025-2026 Service and Repair Manual: Precautions for Harness Repair
Solder the repaired area and wrap tape around the soldered area.
NOTE:A fray of twisted lines must be within 110 mm (4.33 in).
Bypass connection is never allowed at the repaired area.
NOTE:
Precautions for Trouble Diagnosis
CAUTION:
Follow the instructions listed below. Failure to do this may cause damage to parts:
Never apply 7.0 V or more to the measurement terminal.
Use a tester with open terminal voltage of 7.0 V or ...
Basic Inspection
...
Other materials:
Work Procedure
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to combination meter following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
NOTE:
Log in the network according to CONSULT guidance.
>>
WORK END ...
Work Procedure
CAUTION:
When performing the following operations, always use CONSULT. (It cannot be performed by any means other than CONSULT.)
Connect external power supply and so on not to lower the 12 V battery voltage.
NOTE:
When replacing the electrical brake control unit, check the procedure for the title n ...
Work Procedure
START
Ignition switch ON.
Check information display of the combination meter.
Is Distance to Engine Oil Change displayed?
YES>>
GO TO 3.
NO>>
GO TO 2.
SELECT OIL CONTROL SYSTEM MODE
Push the Display next switch and select oil control system mode.
>>
GO TO 3.
RESET ENGINE OIL D ...
0.0065