Nissan Armada 2025-2026 Service and Repair Manual: Basic Inspection

Precautions for Harness Repair

Solder the repaired area and wrap tape around the soldered area. NOTE: A fray of twisted lines must be within 110 mm (4.33 in). Bypass connection is never allowed at the repaired area. NOTE: ...

Diagnosis and Repair Work Flow

...

Other materials:

Removal and Installation
REMOVAL Disconnect driver seat control unit connector. Remove driver seat control unit mounting screws . Remove driver seat control unit. INSTALLATION Note the following items, and then install in the reverse order of removal. CAUTION: Be sure to perform ADDITIONAL SERVICE WHEN REPLACING DRIVER SE ...

Work Procedure
CAUTION: Always use CONSULT when adjusting the neutral position of steering angle sensor. (It cannot be adjusted other than with CONSULT.) CHECK THE VEHICLE STATUS (1) Stop vehicle with front wheels in the straight-ahead position. Does the vehicle stay in the straight-ahead position? YES>> G ...

FUEL PUMP CONTROL MODULE (FPCM) : Removal & Installation
REMOVAL Remove the luggage side finisher LH. Refer to Exploded View. Disconnect fuel pump control module (FPCM) harness connector and remove the FPCM from the vehicle. Remove bracket from fuel pump control module (FPCM). INSTALLATION Install in the reverse order of removal. Install bracket to fuel ...