AV COMMUNICATION SYSTEM
Do not apply voltage of 7.0 V or higher to the measurement terminals.
Use the tester with its open terminal voltage being 7.0 V or less.
Be sure to turn ignition/power switch OFF and disconnect the battery cable from the negative terminal before checking the circuit.
Precautions for Removing Battery Terminal
PRECAUTIONS FOR HARNESS REPAIR : PrecautionsExploded View
Without Moonroof Models
Map lamp bracket Headlining assembly Map lamp assembly : Pawl : Metal clip : Vehicle front
With Moonroof Models
Map lamp bracket Headlining assembly Map lamp assembly Dual-lock fastener : Pawl : Metal clip : Vehicle front ...
Removal and Installation
REMOVAL
Without Dynamic Digital Suspension and Electronic Air Suspension
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Remove cylinder body. Hang cylinder body in a place where it will not interfere with work. Refer to Removal and Installation.
CAUTION:
Never depress brake pe ...
Removal and Installation
WARNING:
REMOVAL
WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure engine coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to allow built-up pressure to escape. Carefully remove the cap by t ...