Exploded View
Puddle lamp is integrated structure with door mirror assembly. For exploded view of door mirror, refer to Exploded View.
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
Remove side turn signal lamp. Refer to Removal and Installation.
Remove puddle lamp harness connector 
from door mirror housing assembly 
.
| : vehicle front |
Disconnect puddle lamp harness connector.
Remove puddle lamp fixing screw, and then remove puddle lamp assembly.
Disengage puddle lamp and puddle lamp bracket fixing pawls, and then remove puddle lamp from puddle lamp bracket 
.
 |
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
-
Replacement of bulb is not possible due to the adoption of LED. When replacement, replace puddle lamp as a single part. Refer to Removal and Installation.
Other materials
Ir Sensor
Exploded View
IR sensor assembly
Headlining assembly
IR sensor finisher
: Pawl
: vehicle front
Removal and Installation
REMOVALRemove headlining assembly. Refer to Removal and Installation.
Disconnect IR sensor harness connector .
Remove room lamp harness from IR sensor assembly.
...
Luggage Rear Plate
Removal and Installation
CAUTION:
Never damage the body panel.REMOVALCAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.Remove luggage floor box. Refer to Removal and Installation.
Release luggage rear plate portion of back door weather-strip. Re ...
System Initialization
Description
Initialization of system should be conducted after the following conditions. Refer to Work Procedure.
When the moonroof motor assembly or sunshade motor assembly is replaced.
When the moonroof or sunshade does not operate normally. (Incomplete initialization conditions)
Work Procedu ...