NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Third Seat Cushion

Nissan Armada 2025-2026 Service and Repair Manual / Body Interior / Seat / Third Seat / Third Seat Cushion

Disassembly and Assembly

DISASSEMBLY

Disengage seat cushion trim fixing retainers .

Remove hinge cover (LH and RH).Remove fixing screw .

Disengage fixing pawl, and then remove hinge cover.

: Pawl

Remove seat cushion frame assembly mounting bolts .

Remove bushes from seat cushion frame assembly.

Disengage harness fixing clips, and then disconnect harness connectors.

CAUTION:

Before performing removal operation, check the installation position of harness connectors and harness fixing clips.

Remove seat cushion frame assembly.

Disengage seat cushion trim fixing retainers .

  • LH seat

  • RH seat

Remove seat cushion trim and pad as a set from seat cushion frame assembly.

Remove hog rings, and then separate seat cushion trim and pad.

CAUTION:

Before removing hog rings, check its position because it should be installation in position.

Remove seat buzzer from seat cushion frame assembly (power RH seat). Refer to Removal and Installation.

ASSEMBLY

Note the following items, and then assemble in the reverse order of disassembly.

CAUTION:

  • Always install hog ring in position.

  • Never reuse hog ring after disassembly, using new hog ring.

  • Use new hog ring if removed or crimped unsuccessfully.

  • Never reuse seatback frame assembly mounting bolts after disassembly, replace with new bolts.

  • Be installed harnesses and harness fixing clips in position.

  • If harnesses clip be broken, replace with new clip and it install in position where marked before removing clip.

    Other materials

    Precautions
    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...

    Writing of Calibration Data
    Work Procedure DESCRIPTIONIf only the around view monitor control unit is replaced, the calibration data stored in the camera can be written to the around view monitor control unit by selecting "Camera Calibration" of "Work Support" mode in CONSULT.WORK PROCEDUREWRITE CALIBRATION DATA With CONSULT ...

    Spark Plug
    Inspection WARNING: Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System. INSPECTION AFTER REM ...