Removal and Installation
REMOVAL
Fully close rear door glass.
Remove rear door woofer. Refer to Removal & Installation.
Remove rear door check link mounting bolt of vehicle body side.
Remove rear door check link mounting bolts of rear door panel, and then take rear door check link out from the hole of rear door panel.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check the open/close operation. Refer to Inspection.
Other materials
Accelerator Control System. Accelerator Control System
Accelerator Control System
Exploded View
Accelerator pedal assembly
Accelerator pedal bracket
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
Removal and Installation
REMOVALCAUTION:
Never disassemble accelerator ped ...
A/c Auto Amp.
Exploded View
Front blower unit assembly
A/C auto amp.
: vehicle front
Removal and Installation
REMOVAL2WD ModelsRemove glove box assembly. Refer to Removal and Installation.
Remove passenger knee air bag module. Refer to Removal and Installation.
Disconnect A/C auto amp. ...
Engine Does Not Start When Intelligent Key Is Inside of Vehicle
Description
Engine does not start when push-button ignition switch is pressed while carrying Intelligent Key.NOTE:
Before starting diagnosis check that vehicle condition is as shown in “Conditions of vehicle”, and check each symptom.
The engine start function, door lock function, power distr ...