Removal and Installation
REMOVAL
Apply protective tape (A) to rear door panel 
around rear door weather-strip 
fixing clips for preventing damage.
Disengage fixing clips on the reverse side of rear door weather-strip using a remover tool (A).
 |
: Clip |
CAUTION:
-
Never damage rear door panel.
-
When removing, never confuse the 2 types of rear door weather-strip
fixing clips 
and 
.
Remove rear door check link mounting bolt of vehicle body side.
Remove rear door weather-strip from rear door panel.
INSTALLATION
Install in the reverse order of removal.
Other materials
Low Tire Pressure Location Indicator Continues Displaying
Description
The low tire pressure location indicator continues displaying though low tire pressure warning lamp turns/stays OFF.
Diagnosis Procedure
CHECK TIRE PRESSURE
Ignition switch ON.
CAUTION:
Never start the engine.
Check the tire pressure for all wheels and adjust to the specified value. ...
Automatic Back Door Warning Buzzer
Removal and Installation
REMOVALRemove rear bumper fascia. Refer to Removal and Installation.
Disconnect automatic back door warning buzzer harness connector.
Remove automatic back door warning buzzer mounting nuts , and then remove automatic back door warning buzzer .
INSTALLATIONInstall in the re ...
Rear Door Glass
Exploded View
Rear door glass run
Rear door panel
Hole seal 1
Hole seal 2
Rear door glass
Rear door lower sash upper
Rear door lower sash lower
Rear door inner frame rear
Rear door inner frame front
Rear door regulator assembly
Rear door power window motor
Rear ...