Diagnosis Procedure
CHECK REAR WINDOW DEFOGGER
Check rear window defogger. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
Change of System Mode
Description
CAUTION:
When the following operations are performed, always use CONSULT, for performing "System mode change" of "Work support". Refer to Work Procedure.×: Required —: not required Procedure System mode change
Removing/installing ABS actuator and electric unit (control unit)
...
Passenger Air Bag Module
Exploded View
Instrument panel assembly
Steering member
Passenger air bag module
: Clip
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: Indicates that the part is connected at points with same symbol in actual vehicle.
Removal and Installation
WARNING:
Alway ...
Hood Seal
Removal and Installation
REMOVALApply protective tape (A) on the part to protect it from damage.
Disengage hood seal fixing clips using a remover tool (A), and then remove hood seal .
INSTALLATIONInstall in the reverse order of removal. ...