Removal and Installation
REMOVAL
Remove back door lower finisher. Refer to Removal and Installation.
Disconnect rear camera (driving video recorder) harness connector 
.
Remove mounting bolts , and remove rear camera (driving video recorder) from vehicle.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Do not touch or shock the rear camera (driving video recorder) lens area or drop the rear camera (driving video recorder).
-
Make sure that the rear camera (driving video recorder) harness is not twisted after installation.
Other materials
Camshaft
Exploded View
Camshaft bracket (No. 1) (bank 1)
Camshaft (EXH) (bank 1)
Camshaft (INT) (bank 1)
Camshaft bracket
Dowel pin
Plug
Gasket
Camshaft signal plate (EXH)
Camshaft signal plate (INT)
Cylinder head (bank 1)
Exhaust camshaft sprocket (bank 1)
Intake camsha ...
Low-Pressure Pipe
Removal and Installation
WARNING:
Jacking up or lifting up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System (With ele ...
Front Door Pocket Lamp
Exploded View
Front door pocket lamp is integrated structure with front door finisher. For exploded view of front door finisher, refer to Exploded View.
Replacement
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric ...