Removal and Installation
REMOVAL
Remove TORX bolts, and then remove rear door striker.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Never reuse TORX bolt. Always replace it with a new one when it is removed.
-
Before tighten rear door striker mounting TORX bolts to the specified torque, perform the fitting adjustment. Refer to Adjustment.
Other materials
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCE *1: Include 1st trip DTC.
*2: Include 1st trip freeze frame data.
DETAILED FLOWGET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the “Diagno ...
Rear Stabilizer
Exploded View
Stabilizer bar
Stabilizer bushing
Stabilizer clamp
Front lower link
Stabilizer connecting rod
: N·m (kg-m, ft-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury ...
Refrigerant Pressure Sensor
Removal and Installation
REMOVALCAUTION:
Perform lubricant return operation before each refrigeration system disassembly. However, if a large amount of refrigerant or lubricant leak is detected, never perform lubricant return operation. Refer to Perform Lubricant Return Operation.
When disconnec ...