REMOVAL
Remove the headlining assembly. Refer to Removal and Installation.
Remove the roof antenna harness connector.
Remove roof antenna mounting nut
, and then remove roof antenna.

INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful about tightening torque. If the tightening torque becomes loose, the antenna sensitivity will deteriorate, and if it becomes excessive, the roof panel may be deformed.
CAUTION:
Without ProPILOT ASSIST 2.1
Be sure to replace the washer during installation (it cannot be reused).
If the antenna holder is cracked or damaged, be sure to replace the antenna holder as well.
Exploded View
Antenna FeederSymptom Table
WARNING:
Perform self-diagnosis using CONSULT before the symptom diagnosis. Perform trouble diagnosis if any DTC is detected. Refer to DTC Index.
SymptomPossible causeHow to solveVehicle height is not risen/fallenEngine is stoppedStart the engine.Each switch is OFFCheck the staus of the switch.Elect ...
Disassembly and Assembly
DISASSEMBLY
Fix shaft with a vise.
CAUTION:
Protect shaft when fixing with a vise using aluminum or copper plates.
Remove circular clip from housing.
Remove dust shield from housing.
Remove boot bands, and then remove boot from housing.
Put matching marks on housing and shaft.
CAUTION:
Use paint o ...
Commercial Service Tools or/and Repair Part
Tool name Description Tube presser
Pressing the tube of liquid gasket Power tool
Loosening nuts and bolts TORX socket
Removing and installing drive plate Mobile floor crane
Removing and installing engine Belt slinger
Removing and installing engine 1.Compression gauge
2.Adapter
Che ...