Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation

Refilling

WARNING: Recommended oil and capacity Refer to Fluids and Lubricants. Set a gasket on filler plug and install it on final drive assembly. CAUTION: Never reuse gasket. Tighten filler plug to the ...

Side Oil Seal

...

Other materials:

Anti-Freeze Coolant Mixture Ratio
The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The antifreeze solution contains rust and corrosion inhibitors. Additional engine cooling sy ...

Removal and Installation
WARNING: REMOVAL CAUTION: Rear Washer Tube A Remove fender protector RH. Refer to Removal and Installation. Disconnect rear washer tube A from connector and remove rear washer tube A from fixing clip . Remove rear washer tube fixing clips . Remove dash side finisher RH. Refer to Removal and In ...

Rear Floor Front
WARNING: Work after rear fender, outer rear sill reinforcement, outer rear wheelhouse, and inner rear wheelhouse are removed. Remove the welding point for easier installation. : Vehicle front : Drill φ6 mm (0.24 in) hole for the plug welding hole (ultra high strength steel). : Weld the parts onto ...