Nissan Armada 2025-2026 Service and Repair Manual: Repair of Rust and Corrosion
Rust on sheet metal is the result of the chemical reaction of steel to oxygen in the air, which is called oxidation. This rust, if left untreated, will increase and finally corrode and damage the sheet metal. If the vehicle is used for a long time under severe environmental conditions, rust or corrosion may form on body surfaces. When repairing rust and corrosion, it is necessary to keep rust from spreading from the repaired portion.
Grinding Power of Air Sander
The diameter (shown in the figure) of a circle traced by a part of the dual action sander and the orbital sander is called an orbit diameter. The larger the area shown with diagonal lines, the greater ...
Removal of Rust Limited to the Skin Panel Surface
Grind the rusted portion with an air sander or the like.
Rust may be more extensive than it appears from the outside. Therefore, it is necessary to grind the area around rusted portion. Repair the gr ...
Other materials:
Exploded View
Back door panel Tail lamp LH Grommet Tail lamp RH : Clip : N·m (kg-m, in-lb) ...
Exploded View
Front bumper fascia Grommet Front grille upper Front grille Front emblem Front camera : Clip : Pawl : Indicate that the part is connected at points with same symbol in actual vehicle. ...
Removal & Installation
WARNING:
REMOVAL
Remove engine cover. Refer to Removal and Installation.
Remove ignition coil. Refer to Removal and Installation.
Remove spark plug with a spark plug wrench (commercial service tool).
: 14 mm (0.55 in)
INSTALLATION
Install in the reverse order of removal. ...
0.0077