Nissan Armada 2025-2026 Service and Repair Manual: Safety and Health

Types of MAG Welding

Welding Methods Using Gas Shielded Arc Welding NOTE: Before MAG welding is performed on body components, some test welds should be carried out on offcuts of the replacement part that are not being use ...

Precautions for Operation

In body repair, great importance is attached to quality, efficiency and cost. Consideration for workers' safety and health should, however, be deemed as the most important item. In reality, it is esse ...

Other materials:

Removal and Installation
REMOVAL Remove luggage side lower finisher LH. Refer to Removal and Installation. Disconnect front camera unit harness connectors . Remove mounting bolts , and remove front camera unit . INSTALLATION Installation is in the reverse order of removal. CAUTION: Do not touch or shock the front camer ...

Anti-corrosive Treatment
Anti-corrosive treatment may be performed on three different occasions (before welding, before painting, and after painting). This section explains anti-corrosive treatment for the latter two occasions. (1) ANTI-CORROSIVE TREATMENT BEFORE PAINTING Application of body sealer Body sealer prevents wate ...

Confirmation of The Panel
It is not possible to correct all convex/concave portions in paintless dent repair. Whether or not the parts need to be removed/installed, and tools that can be inserted must be checked for each repair location. When checking the convex/concave location, determine whether or not the paintless dent r ...