Diagnosis Procedure
CHECK DTC OF AIR BAG DIAGNOSIS SENSOR UNIT
Check DTC in “Self Diagnosis Result” mode of “AIR BAG” using CONSULT.
Is DTC detected?
YES>>Perform trouble diagnosis related to the detected DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK DTC OF BCM
Check DTC in “Self Diagnosis Result” mode of “BCM” using CONSULT.
Is DTC detected?
YES>>Perform trouble diagnosis related to the detected DTC. Refer to DTC Index.
NO>>GO TO 3.
CHECK COMBINATION METER
Check combination meter. Refer to Work flow.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
CHECK HARNESS CONNECTOR
Check the harness connector for disconnection, looseness or damage.
Is the inspection result normal?
YES>>GO TO 5.
NO-1>>Damage: Replace malfunctioning harness and connector.
NO-2>>Disconnection or looseness: Securely lock the connector.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES>>GO TO 6.
NO>>Replace malfunctioning harness and connector.
CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE)
Check seat belt buckle switch (driver side). Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 7.
NO>>Repair or replace the malfunctioning parts.
CHECK SEAT BELT BUCKLE SWITCH (SECOND SEAT/THIRD SEAT)
Check seat belt buckle switch (second seat/third seat). Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 8.
NO>>Repair or replace the malfunctioning parts.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
Replace air bag diagnosis sensor unit. Refer to Removal and Installation.
Is the inspection result normal?
YES>>INSPECTION END
NO>>GO TO 9.
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
Is the inspection result normal?
YES>>INSPECTION END
NO>>GO TO 10.
CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
>>
INSPECTION END
Other materials
Noise, Vibration, and Harshness (nvh) Troubleshooting
NVH Troubleshooting Chart
Possible cause and SUSPECTED PARTS Symptom Reference
Vibration Shake Noise
Uneven rotating torque
×
×
Inspection
Center bearing improper installation
×
×
×
Exploded View
Excessive center bearing axial end play
×
×
Inspection
Ce ...
Heater & Air Conditioning System Tools and Preparation
Commercial Service Tools
HFO-1234yf (R-1234yf) Service Tool and Equipment
Never mix HFO-1234yf (R-1234yf) refrigerant and/or its specified lubricant with CFC-12 (R-12) or HFC-134a (R-134a) refrigerant and/or its lubricant.
Separate and non-interchangeable service equipment must be used for handli ...
Ambient Sensor
Removal and Installation
REMOVALRemove front grille. Refer to Removal and Installation.
Disengage fixing pawl.
: Pawl
Disconnect harness connector to remove ambient sensor .INSTALLATIONInstall in the reverse order of removal. ...