Removal and Installation
REMOVAL
Remove luggage side lower finisher. Refer to Removal and Installation.
Press pawls indicated by arrows as shown in the figure, and then remove seat belt hook from luggage side lower finisher.
INSTALLATION
Install in the reverse order of removal.
Other materials
Tire Pressure Sensor
Exploded View
Screw
Tire pressure sensor
Valve
Valve core
Valve cap
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
: Parts that are replaced as a set when the tire is replaced.
Removal & Installation
WARNING:
Jacking up or lift up the vehicle ma ...
Kicking Plate
Removal and Installation
CAUTION:
Never damage the body panel.REMOVALFront Kicking PlateDisengage front kicking plate fixing pawls according to numerical order 1→3 indicated by arrows as shown in the figure, and then remove front kicking plate.
: Pawl
: vehicle front
Rear Kicking PlateDise ...
Filament
Inspection and Repair
INSPECTIONWhen measuring voltage, wrap tin foil around the top of the negative probe. Then press the foil against the wire with your finger.
Attach probe circuit tester (in Volt range) to middle portion of each filament.
If a filament is burned out, circuit tester registers ...