Nissan Armada 2025-2026 Service and Repair Manual: Side Ventilator Grille

Removal and Installation

REMOVAL CAUTION: When removing, always use a remover tool that is made of plastic. Remove center ventilator grille.Remove fixing screw . Disengage fixing pawls. : Pawl Disengage fixing pawls, a ...

Removal and Installation

REMOVAL CAUTION: When removing, always use a remover tool that is made of plastic. Side Ventilator Grille LH Remove instrument finisher A. Refer to Removal and Installation. Remove side ventilator gri ...

Other materials:

Configuration (sonar Control Unit)
Vehicle specification needs to be written with CONSULT because it is not written after replacing the sonar control unit. The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specificat ...

Disassembly and Assembly
DISASSEMBLY Remove mounting insulators with drift [SST: ST33200000 (NI-26082)] if necessary. Remove side shaft assembly. Refer to Disassembly and Assembly. Remove side oil seal from gear carrier with a oil seal remover (commercial service tool). For proper reinstallation, paint matching marks on on ...

Work Procedure
CAUTION: After removing/replacing the yaw rate/side/decal G sensor or replacing the ABS actuator and electric unit (control unit), the decel G sensor of the ABS actuator and electric unit (control unit) must be calibrated first. Refer to Description. PREPARATION BEFORE CALIBRATION PROCEDURE Park the ...