
![]() | Sonar control unit | ||||
![]() | : N·m (kg-m, in-lb) | ||||
SONAR CONTROL UNIT : Removal & InstallationWork Procedure
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the display unit. For details the operation, refer to "CONSULT Operation Manual".
Work Procedure [Display Unit]
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specificat ...
Removal and Installation
CAUTION:
REMOVAL
CAUTION:
Disengage map lamp assembly fixing metal clips and pawls using a remover tool (A), and then pull out map lamp assembly from headlining assembly.
: Pawl : Metal clip
Disconnect harness connectors, and then remove map lamp assembly.
INSTALLATION
Install in the reverse o ...
EVAP CANISTER : Leak Check
CAUTION:
Never use compressed air or a high pressure pump.
Never exceed 4.12 kPa (0.042 kg/cm2, 0.6 psi) of pressure in EVAP system.
NOTE:
Never start engine.
Improper installation of EVAP service port adapter to the EVAP service port may cause a leak.
WITH CONSULT
To locate the EVAP leak, install ...