Speed Adjust by Route is an intelligent feature available in the Nissan Armada as part of the advanced ProPILOT Assist 1.1 and 2.1 systems. Designed for vehicles equipped with an integrated map locator system, this function enhances driving comfort by automatically adapting vehicle speed to match upcoming road conditions.
Before using this feature in the Nissan Armada, it is essential to carefully review the entire ProPILOT Assist section, including system operation and display indications, to ensure safe and proper use.
When Speed Adjust by Route is active in the Nissan Armada on limited-access highways, the system utilizes navigation data to anticipate road geometry. It automatically adjusts the vehicle’s speed when approaching freeway curves or interchanges, helping provide a smoother and more controlled driving experience. However, the system may not reduce speed in all situations, and the driver must always be ready to apply braking when necessary.
After passing through curves or interchanges, the Nissan Armada will gradually accelerate back to the previously set cruising speed, maintaining driving efficiency and comfort.
When Speed Adjust by Route is active, a dedicated icon appears in the Nissan Armada vehicle information display to confirm system operation.

How to enable/disable Speed Adjust by Route:
Vehicle information display
Settings → Driver Assistance → Intelligent Cruise → Speed Adjust by Route → ON/ OFF
Drivers of the Nissan Armada can easily activate or deactivate this feature through the settings menu, allowing flexibility depending on driving conditions or personal preference.
NOTE:
- The Nissan Armada Speed Adjust by Route system will not operate while the accelerator pedal is being pressed.
- The effectiveness of the system may vary depending on the selected following distance to the vehicle ahead.
- All settings remain stored in the Nissan Armada even after the engine is restarted.
- The Speed Adjust function may still activate when Steering Assist with HD map data is active, even if Speed Adjust by Route is manually disabled.
WARNING
The following outlines critical limitations of the Speed Adjust by Route system in the Nissan Armada. Failure to observe these limitations may result in serious injury or death.
- The Nissan Armada Speed Adjust by Route system has inherent limitations
and may not function in all traffic, weather, or road conditions.
The driver must remain attentive, maintain full control of the vehicle, and adjust speed as necessary at all times.
- This system does not bring the Nissan Armada to a complete stop. The driver must apply braking whenever required.
- The system does not operate on entrance or exit ramps, even when driving on highways.
- The driver is always responsible for selecting an appropriate speed, following traffic laws, and monitoring surrounding traffic.
- Speed Adjust by Route is not available in certain regions, such as Hawaii or U.S. island territories.
- The Nissan Armada system may behave unpredictably or fail to adjust speed
correctly under certain conditions, requiring manual driver intervention.
Common examples include:
- When the map locator system cannot connect to retrieve updated navigation data.
- When the navigation system software license has expired.
- When map data is outdated, incomplete, or unavailable.
- When driving in regions not supported by the Nissan Armada navigation system.
- When traveling on newly constructed or modified roads not reflected in map data.
- When approaching complex road layouts such as splits or freeway interchanges.
- When driving in adverse weather conditions or on poor-quality road surfaces.
Additional recommendation: While the Nissan Armada Speed Adjust by Route feature enhances driving convenience and efficiency, it should always be treated as a support system. The driver must remain fully engaged and ready to intervene to ensure maximum safety in all driving situations.
Other materials
Push-Button Ignition Switch
Removal and Installation
REMOVALRemove instrument pad B. Refer to Removal and Installation.
Disengage the fixing pawls using a remover tool (A) and then remove push-button ignition switch from instrument pad B.
: Pawl
INSTALLATIONInstall in the reverse order of removal. ...
Preset Switch
Exploded View
Front center console switch finisher assembly
Preset switch
: N·m (kg-m, in-lb)
Removal & Installation
REMOVALRemove the front center console switch finisher assembly. Refer to Removal and Installation.
Remove the preset switch mounting screw , and remove ...
Rear Disc Brake
Brake Pad
Inspection and Adjustment
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System ...