NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Steering System Service Data and Specifications

Nissan Armada 2025-2026 Service and Repair Manual / Steering / Steering System / Steering System Service Data and Specifications

Steering Wheel

Item Standard
Steering wheel axial end play 0 mm (0 in)
Steering wheel play on the outer circumference 0 – 35 mm (0 – 1.38 in)
Steering wheel turning force 34 N (3.5 kgf, 7.6 lbf) or less

Steering Angle

WITHOUT DINAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
Item Standard
Inner wheel Minimum 34°05' (34.09°)
Nominal 37°05' (37.08°)
Maximum 38°05' (38.08°)
Outer wheel 33°25' (33.42°)
WITH DINAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
Item Standard
Inner wheel Minimum 33°55' (33.92°)
Nominal 36°55' (36.92°)
Maximum 37°55' (37.91°)
Outer wheel 33°15' (33.25°)

Steering Column

Item Standard

Steering column length*

(maximum telescopic) 		600.3 - 604.3 mm (23.63 - 23.79 in)
Tilt operating range* 44 mm (1.73 in)
Telescopic operating range* 60 mm (2.36 in)
Rotating torque 0.2 N·m (0.02 kg-m, 2 in-lb) or less

*: For measuring position, Refer to Inspection.

Steering Shaft

Item Standard
Sliding range* 50 mm (1.97 in) or more
Lower joint length* (extended position) 490 mm (19.29 in) or less
Steering shaft runout* 0.2 mm (0.008 in) or less

*: For measuring position, Refer to Inspection.

Steering Gear and Linkage

Item Standard

: Gear housing end

: Inner socket end
Rack stroke neutral position (C) 27.5 mm (1.083 in)
Rack stroke full stroke position (C) 154 mm (6.06 in)
Outer socket ball joint Swing force* (Spring balance measurement) 14.0 – 40.6 N (1.43 – 4.14 kgf, 3.15 – 9.12 lbf)
Ball joint rotating torque 0.3 – 2.9 N·m (0.03 – 0.29 kg-m, 3 – 25 in-lb)
Axial end play 0.5 mm (0.020 in) or less
Inner socket ball joint Swing force* (Spring balance measurement) 9.2 – 72.0 N (0.94 – 7.3 kgf, 2.07 – 16.18 lbf)
Axial end play 0.2 mm (0.008 in) or less
Inner socket length 75.4 mm (2.968 in)

*: For measuring position, Refer to Inspection.

    Other materials

    Precautions
    Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...

    Rear Center Console Assembly
    Exploded View REMOVAL Rear center tray cup holder mat Rear center tray front mask Rear center tray assembly Rear center tray rear mask Rear center pocket mat     : Pawl DISASSEMBLY Rear center tray assembly Rear center tray reinforcement     Removal and ...

    Inside Key Antenna
    Console Removal and Installation REMOVALRemove front center console bracket. Refer to Removal and Installation. Disconnect inside key antenna (console) harness connector. Remove inside key antenna (console) fixing TORX bolts , and then remove inside key antenna (console) . INSTALLATIONInstall in t ...