Work SupportWork Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Get the detailed information about symptom from customer.
Check the drive mode indicator on the meter appeared.
Check the drive mode indicator on the meter changed when operates the drive mode selector switch.
>>
GO TO 2.
CHECK THE ...
Normal Operating Condition
When the back door position is in the range of [between "just before fully closed" and the position approximately less than 150 mm (5.91 in) from "just before fully closed" ], the back door does not operate even if any of switches are operated.
To operate the back door by switches, manually close ...
Diagnosis Procedure
NOTE:
Check the stop/start system operation condition. Refer to System Description.
CHECK STOP/START PROHIBIT CAUSE
With CONSULT
Select “Stop/Start prohibit cause data recorder” in “Work support” mode of “ENGINE” using CONSULT.
Does "Stop/Start prohibit cause data recorder" show fail-saf ...