Nissan Armada 2025-2026 Service and Repair Manual: Symptom Table
NOTE:
For Navigation system operation information, refer to Navigation system Owner's Manual.
BASIC OPERATIONS
| Symptom | Possible cause | Possible solution |
|---|---|---|
| No image is displayed. | The brightness is at the lowest setting. | Adjust the brightness of the display. |
| The systems in the video mode. | Press “DISC-AUX” to change the mode. | |
| The display is turned off. | Press “ -” to turn on the display. | |
| The interior of the vehicle becomes the a little less than 80°C (176°F) or high temperature, and the protection of the display acts, and a display is turned off. | Wait until the interior of the vehicle has cooled down. | |
| Screen not clear. | Contrast setting is not appropriate. | Adjust the contrast of the display. |
| No voice guidance is available. Or The volume is too high or too low. | The volume is not set correctly, or it is turned off. | Adjust the volume of voice guidance. |
| Voice guidance is not provided for certain streets (roads displayed in gray). | This is not a malfunction. | |
| No map is displayed on the screen. | A screen other than map screen is displayed. | Press “MAP”. |
| The screen is too dim. The movement is slow. | The temperature in the interior of the vehicle is low. | Wait until the interior of the vehicle has warmed up. |
| Some pixels in the display are darker or brighter than others. | This condition is an inherent characteristic of liquid crystal displays. | This is not a malfunction. |
| Some menu items cannot be selected. | Some menu items become unavailable while the vehicle is driven. | Park the vehicle in a safe location, and then operate the navigation system. |
NOTE:
Locations stored in the Address Book and other memory functions may be lost if the vehicle's battery is disconnected or becomes discharged. If this occurs, service the vehicle's battery as necessary and re-enter the information in the Address Book.
Other materials:
Inspection
Check front and rear axle and suspension parts for excessive play, cracks, wear or other damage.
Shake each wheel to check for excessive play.
Check wheel bearings for smooth operation.
Check axle and suspension nuts and bolts for looseness.
Check strut (shock absorber) for oil leakage or other dam ...
Work Procedure
Perform camera calibration and perform writing to the around view monitor control unit, after removal/installation or replacement of each camera or camera mounting parts (front bumper molding center, door mirror, or others), or replacement of around view monitor control unit.
Parts name Operatio ...
Removal and Installation
REMOVAL
Remove front door finisher. Refer to Removal and Installation.
Remove front door inside handle fixing screws .
Remove front door inside handle fixing pawls, and then remove front door inside handle.
：Pawl
INSTALLATION
Note the following items, and then install in the reverse order o ...
0.0068