Description
Sunshade does not operate normally.
-
Sunshade OPEN/CLOSE does not operate.
-
Sunshade OPEN/CLOSE operation is slow.
-
Judder occurs during OPEN/CLOSE operation of sunshade.
Diagnosis Procedure
CHECK SUNSHADE
Check sunshade for damage, deformation, of interference with other parts.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check sunshade motor assembly power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK LIN COMMUNICATION CIRCUIT
Check LIN communication circuit. Refer to Diagnosis Procedure.
YES>>
GO TO 4.
NO>>Repair or replace the malfunctioning parts.
CHECK SUNSHADE SWITCH
Check sunshade switch. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Repair or replace the malfunctioning parts.
CHECK COMMUNICATION SIGNAL CIRCUIT
Check communication signal circuit. Refer to Component Function Check.
Is the inspection result normal?
YES>>Replace sunshade motor assembly. Refer to Removal and Installation.
NO>>Repair or replace the malfunctioning parts.
Other materials
Rear Seat Belt Warning (information Display) Does Not Operate
Diagnosis Procedure
CHECK DTC OF AIR BAG DIAGNOSIS SENSOR UNIT
Check DTC in “Self Diagnosis Result” mode of “AIR BAG” using CONSULT.
Is DTC detected?
YES>>
Perform trouble diagnosis related to the detected DTC. Refer to DTC Index.
NO>>
GO TO 2.
CHECK COMBINATION METER
Check com ...
Squeak and Rattle Trouble Diagnoses
Work Flow
CUSTOMER INTERVIEW
The customer may not be able to provide a detailed description or the location of the noise. Attempt to obtain all the facts and conditions that exist when the noise occurs (or does not occur).
If there is more than one noise in the vehicle, perform a diagnosis and re ...
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get the detailed information about symptom from customer.
Check the drive mode indicator on the meter appeared.
Check the drive mode indicator on the meter changed when operates the drive mode selector switch.
>>
GO T ...