
Detection zone
Basic information
The Nissan Armada Trailer Blind Spot Warning (BSW) function is specifically designed to enhance safety while towing by extending the detection area to include the full length of the attached trailer. In this configuration, the monitoring zone begins at the side mirrors of the Nissan Armada and stretches all the way to the rear end of the trailer, while also covering approximately 10 ft (3.0 m) on each side.
This extended detection capability allows the Nissan Armada to provide more accurate alerts when towing, ensuring improved awareness of surrounding vehicles even when a trailer significantly increases the vehicle’s overall length.
Setting the trailer length
Before activating the Trailer BSW function in the Nissan Armada, it is essential to manually input the exact trailer length. This setting is configured through the vehicle information display.
WARNING
The Nissan Armada cannot automatically determine the trailer dimensions. The driver must manually enter the correct trailer length.
If the trailer length is entered incorrectly, the Blind Spot Warning system in the Nissan Armada may provide inaccurate alerts or fail to function properly, potentially increasing the risk of unsafe driving situations.
NOTE:
- When the Trailer BSW function is active in the Nissan Armada, several advanced driver assistance systems are automatically disabled, including Intelligent Lane Intervention (I-LI), Intelligent Blind Spot Intervention (I-BSI), Rear Cross Traffic Alert (RCTA), Rear Automatic Braking (RAB), and Steering Assist (ProPILOT Assist).
- The radar sensors of the Nissan Armada may have difficulty detecting vehicles traveling at nearly the same speed when they enter the extended detection zone.
- The Nissan Armada Trailer BSW system may occasionally generate false
alerts in certain situations:
- When your Nissan Armada with a trailer overtakes another vehicle, or when another vehicle overtakes your vehicle and trailer combination.
- When driving through curves or making turns at intersections, where the trailer angle affects sensor perception.
Trailer BSW system limitations
WARNING
The following limitations apply to the Nissan Armada Trailer Blind Spot Warning system. Failure to consider these conditions may result in reduced system performance, increasing the risk of accidents, injury, or death.
- The Trailer BSW system in the Nissan Armada may not operate correctly
under the following conditions:
- Adverse weather conditions such as heavy rain, fog, or snow.
- Improper or unstable trailer connection.
- Multiple vehicles approaching in close succession with minimal spacing.
- When another vehicle is traveling very close behind your Nissan Armada and trailer.
- Immediately after the Trailer BSW system is activated, before full initialization is complete.
- In dense traffic environments, the Nissan Armada Trailer BSW system may produce false or unnecessary warnings due to the complexity of surrounding vehicle movements.
- The functionality and detection performance of the Nissan Armada Trailer BSW system may vary depending on the design, size, and type of trailer being used.
The Nissan Armada Trailer BSW function significantly improves driver awareness when towing, but it should always be used as a support system alongside careful observation and safe driving practices. Proper setup and understanding of its limitations are essential for achieving maximum safety while operating the Nissan Armada with a trailer.
Other materials
Precautions. General Precautions
Description
Observe the following precautions to ensure safe and proper servicing. These precautions are not described in each individual section.
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG� and †...
Front Suspension Assembly
Inspection
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
COMPONENT PARTCheck ...
Additional Service When Replacing Electrical Brake Control Unit
Work Procedure
DescriptionWhen replacing the electrical brake control unit, the procedures of AFTER REPLACEMENT must be performed.CAUTION:
If the electrical brake control unit is undamaged, do not decide to replace it based on DTC detected in the past.AFTER REPLACEMENTAfter replacing the electrical ...