NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada manuals, operating instructions, maintenance references and technical information.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Sensor Rotor

Nissan Armada 2025-2026 Service and Repair Manual / Brakes / Brake Control System. With Vdc / Sensor Rotor

Front Sensor Rotor

Removal and Installation

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

CAUTION:

Replace wheel hub and bearing assembly as an assembly when replacing because sensor rotor cannot be disassembled.

REMOVAL

Remove wheel hub and bearing assembly. Refer to the following.

  • 2WD models: Refer to Removal and Installation.

  • 4WD models: Refer to Removal and Installation.

INSTALLATION

Install wheel hub and bearing assembly. Refer to the following.

  • 2WD models: Refer to Removal and Installation.

  • 4WD models: Refer to Removal and Installation.

Rear Sensor Rotor

Removal and Installation

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

CAUTION:

Replace wheel hub and bearing assembly as an assembly when replacing because sensor rotor cannot be disassembled.

REMOVAL

Remove wheel hub and bearing assembly. Refer to Removal and Installation.

INSTALLATION

Install wheel hub and bearing assembly. Refer to Removal and Installation.

    Other materials

    Diagnosis and Repair Work Flow
    Work Flow OBTAIN INFORMATION ABOUT SYMPTOM Refer to Diagnostic Work Sheet and interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred) as much as possible when the customer brings in the vehicle. >> GO TO 2. CHECK DTC Before ch ...

    Diagnosis and Repair Workflow
    Work Flow DETAILED FLOWINTERVIEW FROM THE CUSTOMER CAUTION: Customers are not professional. Never guess easily like “maybe the customer means that...,” or “maybe the customer mentions this symptom”. >> GO TO 2. CHECK SYMPTOM Reproduce the symptom that is indicated by the customer, b ...

    Around View Monitor Control Unit
    Removal and Installation REMOVALRemove front seat LH. Refer to Removal and Installation. Remove front kicking plate inner LH and rear kicking plate inner LH. Refer to Removal and Installation. Remove dash side finisher LH. Refer to Removal and Installation. Remove center pillar lower garnish LH. Ref ...