Exploded View
 |
Transfer control unit | ||||
 |
: N·m (kg-m, in-lb) |
Removal and Installation
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
REMOVAL
The ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation.
Remove glove box cover. Refer to Removal and Installation.
Disconnect transfer control unit harness connector.
Remove transfer control unit bracket mounting nuts (
) and remove transfer control unit with bracket.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
When replacing transfer control unit, performe writing unit parameter and intial calibration. Refer to Description.
Other materials
Intelligent Key operation
Example
Example
The Nissan Armada Intelligent Key system allows seamless locking and unlocking
of doors without removing the key from your pocket or bag, enhancing both convenience
and everyday usability.
When carrying the Nissan Armada Intelligent Key within the operating range, you ...
Heater & Air Conditioning System Tools and Preparation
Commercial Service Tools
HFO-1234yf (R-1234yf) Service Tool and Equipment
Never mix HFO-1234yf (R-1234yf) refrigerant and/or its specified lubricant with CFC-12 (R-12) or HFC-134a (R-134a) refrigerant and/or its lubricant.
Separate and non-interchangeable service equipment must be used for handli ...
Fillet Molding
Exploded View
Front fillet molding
Rear fillet molding front
Rear fillet molding rear
Grommet
Double-sided tape
[t: 1.2 mm (0.047 in)]
: Clip
: Pawl
: vehicle front
: Always replace after every disassembly.
Front Fillet Molding
Removal and Installation ...