NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Transfer Fluid

Nissan Armada 2025-2026 Service and Repair Manual / Transmission & Driveline / Driveline. Transfer: Atx93a / Transfer Fluid

Inspection

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

FLUID LEAKAGE

Check transfer surrounding area (oil seal, drain plug, and filler plug etc.) for fluid leakage.

FLUID LEVEL

Remove filler plug . Then check that fluid is filled up from mounting hole for the filler plug.

CAUTION:

Never start engine while checking fluid level.

Install filler plug on transfer and then tighten to the specified torque.

CAUTION:

Never reuse filler plug.

Specified torque : 37.5 N·m (3.8 kg-m, 28 ft-lb)

Draining

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

The ignition switch OFF.

Remove the drain plug .

Drain transfer fluid.

Install drain plug to transfer and tighten to the specified torque.

CAUTION:

Never reuse drain plug.

Specified torque : 37.5 N·m (3.8 kg-m, 28 ft-lb)

Refilling

WARNING:

  • Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.

The ignition switch OFF.

Remove filler plug . Fill up with new transfer fluid up to mounting hole for the filler plug.

Recommended fluid and capacity: Refer to Fluids and Lubricants.

CAUTION:

Carefully fill the fluid. (Fill up for approximately 3 minutes.)

Leave the vehicle for 3 minutes, and check the fluid level again.

Install filler plug on transfer and tighten to the specified torque.

CAUTION:

Never reuse filler plug.

Specified torque : 37.5 N·m (3.8 kg-m, 28 ft-lb)

    Other materials

    Diagnosis and Repair Work Flow
    Work Flow DETAILED FLOWINTERVIEW FROM THE CUSTOMER CAUTION: Customers are not professional. Never guess easily like “maybe the customer means that...,” or “maybe the customer mentions this symptom”. >> GO TO 2. CHECK SYMPTOM Reproduce the symptom that is indicated by the customer, b ...

    Intelligent Rear View Mirror System Does Not Operate
    Diagnosis Procedure INTELLIGENT REAR VIEW MIRROR FUNCTIONAL INSPECTION Ignition switch ON. Check the intelligent rear view mirror system is operating normally after setting power supply lever of intelligent rear view mirror lower part to ON. Is the inspection result normal? YES>> GO TO ...

    Gps Antenna
    Feeder Layout GPS antenna AV control unit     Harness connector (M323) Harness connector (M412) Clip with connector (M325) : Clips         To antenna feeder (vehicle side)         Removal & Installation REMOVALRemove the ins ...