Exploded View
 |
Vanity mirror lamp bracket |  |
Headlining assembly |  |
Vanity mirror lamp |
 |
: Pawl | ||||
| : vehicle front | |||||
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
Remove headlining assembly. Refer to Removal and Installation.
Disconnect harness connector.
Disengage vanity mirror lamp bracket fixing pawl using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove vanity mirror lamp and vanity mirror lamp bracket.
|
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
-
Replacement of bulb is not possible due to the adoption of LED. When replacement, replace vanity mirror lamp as a single part. Refer to Removal and Installation.
Other materials
Rear Propeller Shaft
Exploded View
REMOVAL
Propeller shaft assembly
: vehicle front
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
DISASSEMBLY
Snap ring
Journal bearing
Journal
Sleeve yoke
Propeller shaft tube
Flange yoke
: vehicle front
: Always ...
Vehicle Jerks During
Diagnosis Procedure
The vehicle jerks when VDC function, TCS function, ABS function, EBD function, brake limited slip differential (BLSD) function, brake assist function, hill start assist function, advanced hill descent control function or trailer sway control function operates.CHECK SYMPTOM
Check ...
Memory Function Does Not Operate
All Component
Diagnosis Procedure
CHECK MANUAL OPERATION
Check manual operation.
Does it operate normally?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
PERFORM MEMORY STORING
Perform MEMORY STORING. Refer to Description.
Check memory function operation.
Does i ...