Description
VIN Registration is an operation to registering VIN in ECM. It must be performed each time ECM is replaced.
NOTE:
Accurate VIN which is registered in ECM may be required for Inspection & Maintenance (I/M). (For details, refer to Work Procedure .)
Work Procedure
CHECK VIN
Check the VIN of the vehicle and note it. Refer to Information About Identification or Model Code.
>>
GO TO 2.
PERFORM VIN REGISTRATION
With CONSULT
-
Ignition switch ON and engine stopped.
-
On CONSULT screen, select “ECM�>>“Work support�>>“VIN REGISTRATION�.
-
Follow the instruction of CONSULT display.
>>
END
Other materials
Ignition Coil, Spark Plug and Rocker Cover
Exploded View
Bank 1 side
Ignition coil
Spark plug
Rocker cover
Rocker cover gasket
Blow-by hose 1 (bank 1)
Clamp
Blow-by hose 2 (bank 1)
Intake camshaft position sensor
Exhaust camshaft position sensor
Crankcase pressure sensor
Comply ...
Second Seat Belt Buckle
Removal and Installation
REMOVALCaptain SeatRemove inside seat cushion finisher outer. Refer to Disassembly and Assembly.
Disconnect seat belt buckle harness connector and disengage harness clips.
Remove seat belt buckle mounting anchor bolt, and then remove seat belt buckle.Bench SeatRemove the fol ...
Interior Tools and Preparation
Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
Tool number
(TechMate No.)
Tool name Description
(NI-39570)
Chassis ear
Locates the noise
(NI-50397)
Squeak and Rattle Kit
Repairs the cause of noise
Commerci ...