Exploded View
 |
Washer tank |  |
Packing |  |
Washer pump |
Removal and Installation
WARNING:
REMOVAL
CAUTION:
When washer pump is removed, washer fluid may come out so prepare a container to receive washer fluid and never allow washer fluid to be sprinkled.
Remove fender protector RH. Refer to Removal and Installation.
Disconnect front washer tube A from washer pump, washer pump tube 
from connector, and washer pump harness connector 
.
Remove washer pump from washer tank.
Remove packing from washer tank.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Before installation, check packing. If packing has been damaged, replace it with new one.
-
Never twist packing when installing washer pump.
-
After installation, refill washer tank assembly with washer fluid, and then check that there is no leakage.
Other materials
Rear Final Drive Assembly
Exploded View
Final drive mounting bracket
Rear final drive assembly
Upper stopper
Lower stopper
Washer
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to g ...
Configuration (air Bag Diagnosis Sensor Unit)
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the air bag diagnosis sensor unit.CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the air bag diagno ...
Power Seat
Diagnosis Procedure
CHECK SEAT CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT
Check driver seat control unit power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning parts.
CHECK POWER SEAT SW ...