Exploded View
 |
Washer tank |  |
Packing |  |
Washer level switch |
Removal and Installation
WARNING:
REMOVAL
CAUTION:
When washer level switch is removed, washer fluid may come out so prepare a container to receive washer fluid and never allow washer fluid to be sprinkled.
Remove fender protector RH. Refer to Removal and Installation.
Disconnect washer level switch harness connector 
.
Remove washer level switch from washer tank.
Remove packing from washer tank.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Before installation, check packing. If packing has been damaged, replace it with new one.
-
Never twist packing when installing washer level switch.
-
After installation, refill washer tank assembly with washer fluid, and then check that there is no leakage.
Other materials
How to enable/disable the BSW system
Vehicle information display
Steering-wheel-mounted controls (right side)
To configure the Nissan Armada BSW system, follow these steps:
1. Press the
button until "Settings" appears in the vehicle information display, then confirm
using the scroll dial. Navigate to " ...
Basic information
WARNING
Improper loading or exceeding the recommended trailer capacity for your Nissan
Armada can significantly affect handling, braking efficiency, and overall performance,
potentially leading to dangerous driving conditions or accidents.
CAUTION
Avoid towing a trailer or carrying heavy l ...
Power Outlet. Usb Power Socket
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front ...