Inspection
Removal and InstallationExploded View
Without ProPILOT ASSIST 2.1
Battery fix frame Battery cover Negative cable Battery current sensor 12V battery Battery fix rod Battery fix rod clip Battery tray Battery positive terminal Battery positive terminal cover Battery terminal with fusible link Positive cable : N·m (kg-m, in-l ...
Diagnosis Procedure
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace the malfunctioning part.
CHECK LOW BEAM REQUEST SIGNAL
With CONSULT
Select “Low beam request” in “Data Monitor” mode of “ ...
Removal and Installation
REMOVAL
Disengage fixing pawls using a remover tool (A) according to numerical order 1 → 2 indicated by arrows as shown in figure, and then remove sliding switch knob.
: Pawl
Disengage fixing pawls using a remover tool (A), and then remove reclining switch knob.
: Pawl
Remove outside seat cu ...