CAUTION:
Push ignition switch to ON position and set combination switch to AUTO.
Spray water mist toward light & rain sensor.
If front wiper does not operate, perform diagnosis of light & rain sensor. Refer to Component Function Check.
Removal and InstallationExploded View
Light & rain sensor Bracket : Pawl : Vehicle front : Always replace after every disassembly. ...
Removal and Installation
REMOVAL
WARNING:
CAUTION:
Start engine.
Turn OFF the electronic air suspension function. Refer to Operation.
Stop engine.
Lift up the vehicle.
Remove protector mounting bolts and clips, and remove protector.
Remove silicone sealant between the air connector and air tank .
CAUTION:
Never damag ...
Removal and Installation
WARNING:
REMOVAL
The ignition switch OFF.
CAUTION:
Wait for 60 seconds after the ignition switch OFF.
Disconnect negative battery terminal. Refer to Removal and Installation
Disconnect the transfer control actuator connector .
Remove harness clip .
Remove transfer control actuator mounting bolt ...